Motorcycle towing is harder than it looks: a bike does not stand up by itself, has no chassis rails to hook, and almost everything an improviser grabs is a steering part, a fuel container or expensive bodywork. The right setup is a flat deck, a wheel chock and proper straps.
A motorcycle is harder to transport than a car, not easier. It does not stand up by itself, it has no chassis rails to hook, and almost everything an improviser reaches for is either a steering component, a fuel container or an expensive piece of bodywork.
What the job actually needs
A flat deck, a wheel chock to hold the front wheel upright, and soft straps run to points that are designed to take a load. Done properly the bike is compressed slightly into its suspension so it cannot bounce loose, and it stands on its own wheels rather than leaning against anything.
The classic mistakes
Strapping across the handlebars puts the load through the bars, the controls and the fork seals, and a bar-mounted strap that slips takes the bike over with it. Laying a bike on its side leaks fuel and oil and scratches everything it touches. Using ratchet straps directly on painted or polished parts leaves marks that do not come out. And transporting a bike on its side stand, unrestrained, relies on the stand and the suspension doing a job neither was designed for.
Loading is the risky part
Most damage happens getting the bike onto the deck, not during the drive. A ramp that is too steep, a surface that is wet, or one person trying to walk a heavy bike up alone are the usual causes. Ask how they load. Two people and a proper ramp is the answer you want.
Tell them the bike
A sports bike, a cruiser and a scooter each need different handling, and a bike that has been dropped may not roll straight. Say whether the front wheel turns freely and whether the bike is in gear.
After a fall
Do not start it to check. If it has been down, there may be fuel or oil where it should not be. Let it be loaded as it is.
See motorcycle towing in NYC, or call A1 Towing NYC.
Related: flatbed towing and long distance transport.
Motorcycle Towing: Questions
What equipment does motorcycle towing need?
Proper motorcycle towing needs a flat deck, a wheel chock to hold the front wheel, and straps attached to points that will not bend.
When does damage usually happen?
During loading and securing, rather than on the road.
What should I tell the operator?
The make and model, whether it runs, and any damage from a fall.
